This is the model generator for Ostat hose and pipe adapter .
Any changes you make are saved in the URL, so you can share that URL or create a bookmark to keep those changes around.
README .vacuum-hose-adapter-basic ,
vacuum-hose-adapter ,
funnels
End1_ Wall_ Thickness
Wall thickness
End1_ Style
The style of the end
End1_ Measurement
Is the measurement the adapter's outside or inside diameter?
End1_ Diameter
End 1 diameter of the adapter (mm, inch)
End1_ Length
Length of the start connector, including the flange (mm, inch).
End1_ Rotation
Rotation around the z axis. Useful for non symmetrical connectors.
End1_ Taper
Taper of the start connector, use negative to taper other direction.
End1_ StopThickness
Thickness of hose stop
End1_ StopLength
Length of hose stop
End1_ Stop_ Symmetrical
Should the stop be tapered both sides. Might easier to print.
End1_ Barbs_ Count
Number of barbs
End1_ Barbs_ Thickness
Thickness of the barbs, default is half wall thickness
End1_ Barbs_ Symmetrical
Should the barbs be tapered both sides. Might be easier to print.
End1_ Hose_ EndCap_ Diameter
End Cap Inner Diameter.
End1_ Hose_ EndCap_ Thickness
Thickness of end cap.
End1_ Hose_ EndCap_ GridSize
End cap grid size for holes
End1_ Hose_ EndCap_ GridWallThickness
Thickness of the walls in the end cap
End1_ Hose_ Enable_ Threads
Enable threads Thread side matches Measurement side. Beta feature does not work with taper.
End1_ Hose_ Threads_ Pitch
Thread Pitch
End1_ Hose_ Threads_ Tooth_ Angle
Thread Tooth Angle
End1_ Hose_ Threads_ Tooth_ Height
Thread Tooth Height
End1_ Flange_ Width
Width of Flange added to the connector diameter
End1_ Flange_ Thickness
Thickness of the flange
End1_ Flange_ Screw_ Position
Position of the screws added to the connector diameter, 0 = middle of flange
End1_ Flange_ Screw_ Border
Minium amount of the material around the magnet holes(mm), 0 = End1_Flange_Width / 4
End1_ Flange_ Screw_ Count
Number of Screw holes flange
End1_ Flange_ Screw_ Diameter
The diameter of the screws (mm)
End1_ Magnets_ Count
Number of magnets in the connector
End1_ Magnet_ Diameter
The diameter of the magnets (mm)
End1_ Magnet_ Thickness
The thickness of the magnets (mm)
End1_ Magnet_ Border
Minium amount of the material around the magnets (mm)
End1_ Magnet_ ZOffset
Raises the magnet so it is fully enclosed (mm)
End1_ Magnet_ Flange_ Thickness
Thickness of the magnet flange (mm)
End1_ Ring
Include a flange alignment ring
End1_ Magnet_ Twist_ Lock_ Size
Magnetic ring Twist lock bolt size (draft setting)
End1_ Extension_ Length
Length of the extension
End1_ Extension_ GridSize
Size of the grid in the extension. 0: diameter/6
End1_ Extension_ GridWallThickness
Size of the grid walls in the extension. 0: no grid, -1: uses wall thickness
End1_ Extension_ Text
End1_ Extension_ Text_ Size
Transition_ Style
tapered for hose connections, flat for attaching to a device
Transition_ Length
Length of the transition between the two ends
Transition_ Bend_ Radius
Radius of transition bend (mm)
Transition_ Angle
Angle of bend through the transition section.
Transition_ Offset
offset for the connector, not supported on taperedbend.
Transition_ End2_ Count
Duplicate the second connector. Adjust angle and bend radius to make it work.
Transition_ HullLength
MulitConnector, connector in hull length.
Transition_ HullCenter
MulitConnector, add centre connector.
Transition_ HullCenterLength
Transition_ HullyOffset
MulitConnector, connector in hull offset.
Transition_ HullCenterHeight
MulitConnector, center connector height. default is 2*lengthInHull
Transition_ End2_ Angle
Transition_ Base_ Type
Include a flat section on the transition to assist with printing
Transition_ Base_ Thickness
Support Base Additional Thickness;
Transition_ Base_ Width
Support Base Width, Default is half diameter
Transition_ Base_ Length
Support Base Length Default is 2/3 diameter
Transition_ Base_ Angle
Support Base Angle position, default half of Bend Radius;
End2_ Wall_ Thickness
Wall thickness
End2_ Style
End2_ Measurement
Is the measurement the adapter's outside or inside diameter?
End2_ Diameter
End 2 diameter of the adapter (mm, inch)
End2_ Length
Length of the start connector, including the flange (mm, inch).
End2_ Rotation
Rotation around the z axis. Useful for non symmetrical connectors.
End2_ Taper
Taper of the start connector, use negative to taper other direction.
End2_ StopThickness
Thickness of hose stop
End2_ StopLength
Length of hose stop
End2_ Stop_ Symmetrical
Should the stop be tapered both sides. Might easier to print.
End2_ Barbs_ Count
Number of barbs
End2_ Barbs_ Thickness
Thickness of the barbs, default is half wall thickness
End2_ Barbs_ Symmetrical
Should the barbs be tapered both sides. Might be easier to print.
End2_ Hose_ EndCap_ Thickness
Thickness of end cap, 0 means disabled
End2_ Hose_ EndCap_ Diameter
End Cap Inner Diameter.
End2_ Hose_ EndCap_ GridSize
End cap grid size for holes
End2_ Hose_ EndCap_ GridWallThickness
Thickness of the walls in the end cap
End2_ Hose_ Enable_ Threads
Enable threads Thread side matches Measurement side. Beta feature does not work with taper.
End2_ Hose_ Threads_ Pitch
Thread Pitch
End2_ Hose_ Threads_ Tooth_ Angle
Thread Tooth Angle
End2_ Hose_ Threads_ Tooth_ Height
Thread Tooth Height
End2_ Flange_ Width
Width of Flange added to the connector diameter
End2_ Flange_ Thickness
Thickness of the flange
End2_ Flange_ Screw_ Position
Position of the screws added to the connector diameter, 0 = middle of flange
End2_ Flange_ Screw_ Border
Minium amount of the material around the magnets (mm), 0 = End1_Flange_Width / 4
End2_ Flange_ Screw_ Count
Number of Screw holes flange
End2_ Flange_ Screw_ Diameter
The diameter of the screws (mm)
End2_ Magnets_ Count
Number of magnets in the flange
End2_ Magnet_ Diameter
The diameter of the magnets
End2_ Magnet_ Thickness
The thickness of the magnets
End2_ Magnet_ Border
Size of the material around the magnets
End2_ Magnet_ ZOffset
Raises the magnet so it is fully enclosed (mm)
End2_ Magnet_ Flange_ Thickness
Inner diameter of the Magnet flange
End2_ Ring
Include a flange alignment ring
End2_ Magnet_ Twist_ Lock_ Size
Magnetic ring twist lock bolt size (draft setting)
End2_ Nozzle_ Shape
Is the measurement the adapter's outside or inside diameter?
End2_ Nozzle_ Size
End2_ Nozzle_ Tip_ Wall_ Thickness
End2_ Nozzle_ Radius
End2_ Nozzle_ Offset
End2_ Nozzle_ Chamfer_ Percentage
End2_ Nozzle_ Chamfer_ Angle
End2_ Extension_ Length
Length of the extension
End2_ Extension_ GridSize
Size of the grid in the extension. 0: diameter/6
End2_ Extension_ GridWallThickness
Size of the grid walls in the extension. 0: no grid, -1: uses wall thickness
End2_ Extension_ Text
End2_ Extension_ Text_ Size
End3_ Wall_ Thickness
Wall thickness
End3_ Style
End3_ Measurement
Is the measurement the adapter's outside or inside diameter?
End3_ Diameter
End 3 diameter of the adapter (mm, inch)
End3_ Length
Length of the start connector, including the flange (mm, inch).
End3_ Rotation
Rotation around the z axis. Useful for non symmetrical connectors.
End3_ Taper
Taper of the start connector, use negative to taper other direction.
End3_ StopThickness
Thickness of hose stop
End3_ StopLength
Length of hose stop
End3_ Stop_ Symmetrical
Should the stop be tapered both sides. Might easier to print.
End3_ Barbs_ Count
Number of barbs
End3_ Barbs_ Thickness
Thickness of the barbs, default is half wall thickness
End3_ Barbs_ Symmetrical
Should the barbs be tapered both sides. Might be easier to print.
End3_ Hose_ EndCap_ Thickness
Thickness of end cap, 0 means disabled
End3_ Hose_ EndCap_ Diameter
End Cap Inner Diameter.
End3_ Hose_ EndCap_ GridSize
End cap grid size for holes
End3_ Hose_ EndCap_ GridWallThickness
Thickness of the walls in the end cap
End3_ Hose_ Enable_ Threads
Enable threads Thread side matches Measurement side. Beta feature does not work with taper.
End3_ Hose_ Threads_ Pitch
Thread Pitch
End3_ Hose_ Threads_ Tooth_ Angle
Thread Tooth Angle
End3_ Hose_ Threads_ Tooth_ Height
Thread Tooth Height
End3_ Flange_ Width
Width of Flange added to the connector diameter
End3_ Flange_ Thickness
Thickness of the flange
End3_ Flange_ Screw_ Position
Position of the screws added to the connector diameter, 0 = middle of flange
End3_ Flange_ Screw_ Border
Minium amount of the material around the magnets (mm), 0 = End1_Flange_Width / 4
End3_ Flange_ Screw_ Count
Number of Screw holes flange
End3_ Flange_ Screw_ Diameter
The diameter of the screws (mm)
End3_ Magnets_ Count
Number of magnets in the flange
End3_ Magnet_ Diameter
The diameter of the magnets
End3_ Magnet_ Thickness
The thickness of the magnets
End3_ Magnet_ Border
Size of the material around the magnets
End3_ Magnet_ ZOffset
Raises the magnet so it is fully enclosed (mm)
End3_ Magnet_ Flange_ Thickness
Inner diameter of the Magnet flange
End3_ Ring
Include a flange alignment ring
End3_ Magnet_ Twist_ Lock_ Size
Magnetic ring twist lock bolt size (draft setting)
End3_ Nozzle_ Shape
Is the measurement the adapter's outside or inside diameter?
End3_ Nozzle_ Size
End3_ Nozzle_ Tip_ Wall_ Thickness
End3_ Nozzle_ Radius
End3_ Nozzle_ Offset
End3_ Nozzle_ Chamfer_ Percentage
End3_ Nozzle_ Chamfer_ Angle
End3_ Extension_ Length
Length of the extension
End3_ Extension_ GridSize
Size of the grid in the extension. 0: diameter/6
End3_ Extension_ GridWallThickness
Size of the grid walls in the extension. 0: no grid, -1: uses wall thickness
End3_ Extension_ Text
End3_ Extension_ Text_ Size
Draw_ Alignment_ Ring
draw just the alignment ring
Alignment_ Depth
Alignment depth in to flange (mm)
Alignment_ Upper_ Width
Alignment upper width at widest part (mm)
Alignment_ Lower_ Width
Alignment lower width at narrowest part (mm)
Alignment_ Side_ Clearance
Alignment side clearance, to give nice fit (mm).
Alignment_ Depth_ Clearance
Alignment Depth Clearance, to prevent hitting bottom (mm).
Enable_ Debug_ Slice
Slice model in half to be able to easy see inside
Enable_ Calipers_ Slice
Will only show if debug is also enabled
Enable_ Help
fa
minimum angle for a fragment (fragments = 360/fa). Low is more fragments
fs
minimum size of a fragment. Low is more fragments
fn
number of fragments, overrides $fa and $fs